Advertisement
4. Remove the flange-head bolts (3/8 x 1 inch) that
secure the bracket for the brake-caliper assembly to the
spindle and remove the brake-caliper assembly from
the spindle
(Figure
4).
Figure 4
1. Flange-head bolt (3/8 x 1
inch)
2. Spindle
5. Remove the front brake line from the master cylinder
(Figure
5).
Note: Discard the front brake line.
Figure 5
1. Front brake line
3. Caliper bracket
(brake-caliper assembly)
2. Master cylinder
6. Remove the dust cap, hairpin cotter, nut retainer, and
jam nut, and remove the hub and rotor from the
spindle
(Figure
6).
Note: Retain the hub, dust cap, jam nut, nut retainer,
and hairpin cotter.
1. Spindle
2. Rotor
3. Hub
4. Jam nut
7. Remove the 4 hex-socket bolts (5/16 x 3/4 inch), and
remove the rotor from the hub
Note: Discard the rotor and 4 hex-socket bolts (5/16
x 3/4 inch).
1. Hex-socket bolt (5/16 x 3/4
inch)
2. Rotor
3
Figure 6
5. Nut retainer
6. Dust cap
7. Hairpin cotter
(Figure
7).
Figure 7
3. Hub
Advertisement
