Advertisement
Quick Links
Preface
Section 1 of this manual goes into some technical detail
in
describing
the System 6300 including the System 6300
processing
unit and the TM6000
workstation.
Section
2 provides a
step
by-step
procedure
for
installing the
System
6300 including unpacking,
site selection, installation,
and procedures
for initial power-up of the
system.
No special technical knowledge is necessary
to
install and
power up your system.
If you
have problems with the
definition of words, use the glossary at the back of the
manual.
If you have acquired one or more of the peripheral options
available
with your
system, such as
a printer, refer to the
individual peripheral's Installation and User's Guide for
instructions
on how to install and hook up
these
peripheral
units
to your
system.
Section
3
starts
the
user's
guide portion of this manual. The
user's
guide is intended as a reference
for daily
operation of
your system. Included in the user's guide is Section 3, which
identifies
all controls. switches, and indicators of your
system,
and Section 4, which shows you how
to
maintain and
care
for your
system.
Appendix
A of
this manual has the specifications for both
the processing unit and the TM6000 workstation. Appendix
B identifies all the connectors for the processing unit and the
TM6000 workstation for quick
ref,erence.
RESTRICTED RIGHTS
LEGEND
Use, duplication,
or
disclosure
by the
Government
is
subject
to
restrictions
as
set
forth
in paragraph
(b)
(3)
(B)
of
the Rights
in Technical
Data
and
Computer
Software
clause
in
DAR
7-104.9
(a).
Four-Phase Systems, Inc.
10700
North
De
Anza
Boulevard
Cupertino, California
95014
15
November
1984
ilä
Advertisement
