Using The S-Video Out Or The Component Video Output Jacks And The Analog Audio Out Jacks; Connecting To External Equipment - Toshiba D-R160SB Owner's Manual

Using the S-VIDEO OUT or the
COMPONENT VIDEO OUTPUT jacks
and the ANALOG AUDIO OUT jacks
If your TV has an S-Video or a Component Video input
jack, use either an S-Video cable (to connect the
S-VIDEO OUT jack) or a Component Video cable (to
connect the COMPONENT VIDEO OUTPUT jacks), and
an Audio Cable (to connect the ANALOG AUDIO OUT
jacks).
- S-Video connection provides the good quality picture.
- Component connection provides the better quality picture.
1) Follow steps 1 and 2 on page 24.
2) Connect S-VIDEO OUT or COMPONENT VIDEO
OUTPUT jacks of this unit to the S-Video or
Component Video input jacks of your TV. Use a
commercially available S-Video cable or
Component Video cable.
3) Connect the ANALOG AUDIO OUT jacks of this
unit to the analogue Audio input jacks of your
TV. Use a commercially available Audio cable.
Component
S-VIDEO IN Video IN
Y P
S-Video
cable
(not
Component Video
supplied)
cable (not
supplied)
COMPONENT
AUDIO IN
VIDEO OUTPUT
(AV3)
IN
S-VIDEO
Y
OUT IN (AV3)
AV2 (DECODER)
P B /C B
OUT
P /C
R R
AV1 (TV)
ANTENNA
Note for a TV with no S-Video input jack or Scart socket:
• This unit has no RF modulator, so this type of TV cannot
be used.
• Only component connection is compatible with the
Progressive Scan.
AUDIO IN
/C P /C
B B R R
Audio
cable
(not
supplied)
ANALOG
AUDIO OUT
L L
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
R R
COAXIAL

Connecting to external equipment

This unit has four input terminals, AV1, AV2 or AV3 on
the rear panel and AV4 on the front panel. Be sure that
all the units are off before making connections.
■ Recording from a DVD player, VCR or other
Audio-Video equipment with a Scart output
jack (AV2)
Scart cable (not supplied)
AV2 (DECODER)
IN
AV2 (DECODER)
OUT
AV1 (TV)
ANTENNA
Note
• If the external equipment connected to the AV2 jack
supplies control voltage to this unit via Pin 8 of the Scart
cable, the display functions (e.g. P01) of the remote
control cannot be seen on the TV connected to the AV1.
In this case, turn off the external equipment to prevent
control voltage.
■ Recording from a camcorder or other Audio-
Video equipment with no Scart output jack
(AV3 or AV4)
AV3(Rear)
COMPONENT
AUDIO IN ANALOG
VIDEO OUTPUT
(AV3) AUDIO OUT
S-VIDEO
Y
L L
DIGITAL AUDIO OUTPUT
IN (AV3)
OUT
PCM/BITSTREAM
P B /C B
P /C R R
R R
COAXIAL
S-Video Audio cable
cable (not (not supplied)
supplied)
S-VIDEO AUDIO
OUT OUT
Change the setup. (See page 55.)
If no S-Video input jack is available, connect to VIDEO
input jack on the front panel using an RCA Video cable.
AV output jack
(Scart)
COMPONENT
AUDIO IN ANALOG
VIDEO OUTPUT
(AV3) AUDIO OUT
S-VIDEO
Y
L L
DIGITAL AUDIO OUTPUT
IN (AV3)
OUT
PCM/BITSTREAM
P /C
B B
P R /C R R R
COAXIAL
AV4(Front)
PROGRAM I /y
REC ON / STANDBY
L2 S-VIDEO VIDEO L R
Audio
cable
(not
S-Video
supplied)
cable (not
supplied)
S-VIDEO AUDIO
OUT OUT
EN 25