Digital Audio For Better Sound Quality; After You Have Completed Connections - Toshiba D-R160SB Owner's Manual

Connections
Connections (cont'd)
Digital audio for better sound
quality
■ The connections illustrated below are optional
for better sound.
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
COAXIAL
COMPONENT
AUDIO IN ANALOG
VIDEO OUTPUT
(AV3) AUDIO OUT
S-VIDEO
Y
L L
DIGITAL AUDIO OUTPUT
OUT IN (AV3)
PCM/BITSTREAM
P B /C B
R R
P R /C R
COAXIAL
1) For clear digital sound quality, use the DIGITAL
AUDIO OUTPUT PCM/ BITSTREAM (COAXIAL)
jack to connect your digital audio equipment.
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
■ Connecting a Dolby Digital
decoder or MPEG decoder
Connecting multi-channel Dolby Digital decoder
•
allows you to enjoy the multi-channel Dolby Digital
surround system as well as DTS decoder, multi-
channel surround system.
After connecting to a Dolby Digital decoder, set
•
"Dolby Digital" to "Stream" in the Audio menu. (See
page 115.)
• After connecting to a DTS decoder, set "DTS" to
"ON" in the Audio menu. (See page 115.)
After connecting to a MPEG decoder, set "MPEG"
•
to "Stream" in the Audio menu. (See page 115.)
■ Connecting to an MD deck or DAT deck
The audio source recorded in Dolby Digital multi-
•
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
If not connected to a Dolby Digital decoder, set
•
"Dolby Digital" to "PCM" in the Audio menu (see
page 115).
Playing back a DVD using incorrect settings may
•
generate noise distortion, and damage speakers.
Set "Dolby Digital" and "MPEG" to "PCM" and set
•
"DTS" to "OFF" in the Audio menu (see page 115)
for connecting to an MD or DAT deck.
You can use ANALOG AUDIO OUT jacks for the
•
connection of your audio system.
26 EN
Digital audio
input jack
COAXIAL
Coaxial cable
(not supplied)
decoder, DTS
TM
After you have completed
connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the Owner's
Manual of your TV.
Note
• Connect this unit directly to the TV. If the AV cables are
connected to a VCR, pictures may be distorted due to the
effects of the copy protection system.