Advertisement
Step 6. Remove the right side cover and the front cover in the direction of the arrow, respectively.
Step 7. Connect the FPC cable to the Bluetooth module in the correct orientation.
Two FPC cables are supplied with the Bluetooth module. One is designed for the B-EP2DL series, and
the other is for the B-EP4DL series. Care must be taken not to mistake them for each other.
NOTE: Pass the FPC cable through the slot, as shown in the picture below. (B-EP4DL series only)
Step8.
Connect the FPC cable to the CN301 connector on the Main PC board in the correct orientation.
Main PC Board
Right Side Cover
Front Cover
Bluetooth
Module
FPC Cable
3/8
CN301
FPC Cable
Slot
Advertisement
