Advertisement
2. INSTALLATION PROCEDURE
Step 1. Turn off the printer.
Step 2. Slide the battery lever in the direction of the arrow, and remove the battery pack from the printer.
Step 3. Remove the four tapping screws (T-3x10) from the bottom cover.
Step 4. Press the top cover open button to open the top cover.
Step 5. Remove the left side cover in the direction of the arrow.
Top Cover Open Button
NOTE: The gears shown in the picture below is not secured and is easily removed. Be careful not to drop and break
or lose it.
B-EP4DL
Battery Lever
Battery Pack
Top Cover
Gear
T-3x10 Tapping Screw
T-3x10 Tapping Screw
Left Side Cover
B-EP2DL
2/8
Gear
Advertisement
