Advertisement
2. Push the SDIO card of the wireless LAN module in the direction of the arrow to make sure it is firmly
connected.
Step11. Close the front cover.
Front Cover
NOTES: 1. Make sure that the pins on the both sides of the front cover are fit in position, as shown in the pictures
below.
2. Do not install the front cover with the top cover open button depressed. Doing so could disable the top
cover open button after the assembly, and as a result, the top cover cannot be opened.
3. The actual wireless LAN module is covered with the shield sheet, as the picture of the packing list shows.
SDIO Card
Good
Pin
No Good
Top Cover Open Button
5/8
Connector
Wireless LAN module
Advertisement
