Advertisement
Step12. Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the
printer enclosure. Place the cables avoiding the protrusions on the left side cover. Especially, be
carefulof the protrusion E on the cover for the B-EP2DL series.
B-EP4DL Series: Fit the tabs A to D into the slot A' to D'.
Tab B
Tab A
Protrusion
B-EP2DL Series: Fit the tabs A to C into the slot A' to C'.
Tab B
Tab A
E
Protrusion
NOTE: It is easy to mount the left side cover if you fit the tabs from the LCD side in order, then secure the
bottom side. Be careful not to catch the cable by the cover while reassembling.
Step13. Mount the right side cover to the printer while fitting the tabs on the right side cover into the slots of the
printer enclosure.
B-EP4DL Series: Fit the tabs A to C into the slot A' to C'.
Tab C
Tab C
Left Side Cover
Tab B
Tab D
Tab C
C'
Tab A
A'
6/8
D'
C'
B'
B'
A'
C'
B'
A'
Advertisement
