Adding Channels To The Tv's Memory; Programming Channels Automatically - Toshiba 40H80 Owner's Manual

Adding channels to the TV's memory

When you press Channel y or z, your TV will stop only on the
channels stored in the TV's channel memory.
Follow the steps below and on the next page to program all active
channels into the TV's memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and
store them in its memory. After the channels are stored automatically,
you can manually add or erase individual channels (see page 25).
If you use both ANT-1 and ANT-2 terminals, you must program
channels for each input source.
To program channels automatically:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z until TV/CABLE is highlighted.
3. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
SET UP
7
8
LANGUAGE ENGL SH
9
CLOCK SET
10
ANT 1 / 2 ANT1
11
TV / CABLE TV / CABLE
12
CH PROGRAM
13
ADD / ERASE ADD
14
15
16
17
18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
4. Press z to select CH PROGRAM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
SET UP
7
8
LANGUAGE ENGL SH
9
CLOCK SET
10
ANT 1 / 2 ANT1
11
TV / CABLE CABLE
12
CH PROGRAM
13
ADD / ERASE ADD
14
15
16
17
18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
5. Press x or • to start channel programming. The TV will
automatically cycle through all the TV or cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
"Programming Now—Please Wait" appears.
6. When channel programming is complete, the message
"CH Programming Completed" appears.
7. Press Channel y or z to view the programmed channels.
24
1
2
3
4
5
6
7
8
I
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
I
9
10
11
12
13
14
15
16
17
18
Note:
To tune the TV to a channel not programmed
in the channel memory, you must use the
Channel Number buttons on the remote
control.
MENU
yzx •
Channel yz