Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba 43A61 Owner's Manual

Connecting a cable converter box

This connection allows you to view a different picture on your PIP if
you use a converter box to view premium channels. Select ANT 2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area). Use the converter box to change channels.
You will need:
• three coaxial cables
TV
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
COLOR
STREAM
VIDEO 1 VIDEO 2
INPUT
IN DVD IN

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another. To use the TV's features, select ANT-1. To view
premium channels or record with the VCR, select ANT-2, tune the
TV to channel to 3 or 4 (whichever channel is vacant in your area),
and use the converter box to change channels.
You will need:
• one cable splitter
• four coaxial cables (one or more may be provided by your cable
company)
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
From Cable
TV
Stereo VCR
8
From Cable
AUDIO CENTER ANT( 75 )
CHANNEL IN
ANT-1
ON OFF
OUT
OUT
VAR
R L
AUDIO
ANT-2
Y VIDEO
L/
L
P
B MONO
AUDIO AUDIO
P
R
R R
OUT
OUT
Cable converter box
Y
P
B
P
R
Note:
You cannot view premium channels in the
PIP window.
PIP swap is not available with this connection.
IN
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a standard video cable for
better picture performance.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time or the picture performance will
be unacceptable.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.