Power-Up Diagnostics; Home Button - Toro DEC-RS-1000-DR Installation And User Manual

Power-Up Diagnostics

Upon power-up, the gateway will display:
Gateway TM Booting
The Gateway TM will initiate a diagnostic test automatically during power-up. This function will take approximately ten
seconds and it can not be bypassed. If a problem is detected during the diagnostic test, it will be indicated on the display.
These status information cannot be edited. The information is as follows:
Line 1: Gateway Firmware Version and Revision Date
Line 2: Last Power Downtime Date and Time
Example:
Rev: 4.00 09/15/10
PD - 09/16/10
The default Home display will follow after the diagnostic display has timed-out.
Home display example:
Sun 04/02/06 02:31 pm
GW# 001-001 Sec: 57
Day Change: 12:00am

Home Button

Pressing the Home button will revert to the default display. When editing irrigation programs, Station or Gateway
settings, pressing the Home buton will save any setting modifications and return the user to the Home display.
Home display examples:
Sun 04/02/06
GW# 001-001 Sec: 57
Next start:
Sun 04/02/06
GW# 001-001 Sec: 57
Running 02 programs
P01 Sta01
P05 Sta25
The Day Change line will display the next program start time (Next Start: HH:MM) if the current day is an active watering
day. If the gateway is running a program, the Day Change line will display
number of active programs.
Currently, the Gateway only displays the next automatic start for gateway A only. Gateway B's next automatic start is not
displayed.
18
02:31 pm
03:00am
02:31 pm
00:09:46
00:19:51
(typical Home display
with no active scheduled program)
(Home display with two active
scheduled programs)
Running XX programs to indicate the