Table of Contents
Advertisement
Gateway Settings
Satellite Settings allows you to set gateway parameters such as Time, Date and Language.
• Use the Up or Down Arrows
• Use the Left and Right Arrow
• Use the Input Dial
Command
Function
Comm Mode:
Use this menu item to select the gateway mode of operation between Central, Local or Off mode.
Hold All:
Use this menu item to suspend satellite operation and choose the suspension duration from Today, 02-
30 days, Permanent or None. This does not affect manual starts from the front panel.
Hold Rain:
Use this option to suspend satellite operation and choose the suspension duration from Today, 02-30
days, Permanent or None. When activated, Hold Rain will cancel any current watering, along with
suspending operation. This does not affect manual starts from the front panel.
Reset Sta's:
Use this menu item to reset all station settings by selecting Yes. After selecting Yes, press the Up or
Down Arrows
will display:
All station settings will be erased after a successful reset.
Reset Unit:
Use this menu item to reset the gateway settings by selecting Yes. Select Yes using the Input Dial
gateway reboots. The following will display:
!
Power Mode:
Use this menu item to change the power mode from switched to continuous. The default mode is
switched. Continuous mode is helpful for troubleshooting.
Use this menu item to reset all disabled stations with one execution. Select Yes All using the Input Dial
Enable Sta's:
stations can be enabled/disabled by using the Disable function within the Station Settings menu.
Language:
Default language is English. Future option: Spanish.
Clock Set:
Use this menu item to set the current time. Use the Left and Right Arrow Keys
Hours and Minutes parameters then use the Input Dial
Clock Mode:
Use this menu item to select the clock mode between Am/Pm (12-Hour) and 24-Hour mode.
Use this menu item to select the date mode: MMDDYY or DDMMYY.
Date Mode:
Date:
Use this menu item to set the current date. Use the Left and Right Arrow Keys
Month, Date and Year parameters then use the Input Dial
20
to navigate through the menus.
to advance to the next entry field on the same menu line.
to select values when editing.
to activate. There is countdown before the command executes. The following
and press the Up or Down Arrows
Resetting the unit will erase all user-defined program data and configuration values in the
gateway's memory.
and press the Up or Down Arrows
Reset All Stations
to defaults
05
STOP to escape
to activate.There is countdown before the
Reset All Defaults
10
STOP to escape
to activate. Select No to cancel. Individual
to select the
to modify the values.
to select the
to modify the values.
Hide quick links:
Advertisement
Table of Contents
