Table of Contents
Advertisement
Installation and Calibration
Power-Up Conditions
Preset
20
At power-up, the Fader returns to the same settings that
were present when last turned o .
PRESET is used to set the Fader to known conditions.
Press the
4
PRESET/LOCAL
Press
.
4
5
ENTER
When a fader has been PRESET, the display will show
70 MHz in the frequency eld (140 MHz for option
140), 0 dB in the notch depth eld, and 0 dB in the
attenuation eld.
The PRESET conditions are shown in the following
table.
Preset Values
Parameter
HP 11757B
key.
5
Condition
6
Advertisement
Table of Contents
