Operating The Amplifier; Source Selection; Sound Control; Selecting Surround Modes - Philips DFR9000/01 Instructions For Use Manual

Installed speakers
Input signal
Mono
Stereo
(including FM, DAB)
Surround
Multichannel analogue
input

7. Operating the amplifier

Note: We will describe operating the amplifier via the buttons on the remote control. If buttons on the
local keyboard are required for operation, these buttons will be mentioned.

7.1 Source selection

•
Use SELECT (3) to select RECVR.
> You can now operate your DFR9000.
•
Use the source selection buttons (4) to select the sources connected to your DFR9000.
> The left display shows the selected source, followed by the type of input signal (audio,
video).The middle display shows the name of the input sockets the source is connected
to.
Note: If, in the 'AV input' menu, audio and video are set to 'None' for a source, it is not possible to
select this source on your DFR9000. See '10.7 A/V input menu'.

7.2 Sound control

•
Use SELECT (3) to select RECVR.
•
Use the source selection buttons (4) to select the desired A/V source.
Volume
•
Use – VOL + (10) to adjust the volume.
•
Press c MUTE (11) to mute the sound of the active source.
Bass
1
Press BASS/SUBTITLE (12).
2
Use – VOL + (10) to decrease/increase the bass response.
Treble
1
Press TREBLE/ANGLE (13).
2
Use – VOL + (10) to decrease/increase the treble response.
Loudness
•
Press LOUDNESS/MONITOR
Rear volume
1
Press REAR/AUDIO (18).
2
Use – VOL + (10) to adjust the volume of the surround speaker.
Subwoofer volume
1
Press SUB/ZOOM (19).
2
Use – VOL + (10) to adjust the volume of the subwoofer.

7.3 Selecting surround modes

What surround modes can be selected depends on which speakers are connected and on the
type of the incoming signal.The available surround modes are displayed in the middle display.
For an overview and explanation of possible surround modes, see '10. Surround modes'.
•
Use SURROUND (17) to select the various surround modes.
L/R - L/R + C
- L/R + SL/SR
- L/R + C + SL/SR
Mono Mono
Stereo 1. Stereo
2. DPLII movie
3. DPLII music
4. DTS Neo:6 cinema
5. DTS Neo:6 music
Stereo 1. Stereo
2. Dolby Digital or DTS
- - - - - - - -
(15) repeatedly to toggle between loudness on and off.
- L/R + SL/SR/SB
- LR + C + SL/SR/SB
Mono
1. Stereo
2. DPLIIx movie
3. DPLIIx music
4. DTS Neo:6 cinema
5. DTS Neo:6 music
1. Stereo
2. Dolby Digital or DTS
3. Dolby Digital EX or DTS ES
- - - -
ENGLISH 27