Philips DFR9000/01 Instructions For Use Manual page 47

Digital video section (input/output)
'Source only' mode
'Repeater' mode
Audio over HDMI
Tuner
Tuner bands
FM Tuner
MW Tuner
DAB Tuner
General
According HDMI 1.1, HDCP 1.1 and DVI 1.0 standards.
Following formats are supported:
50 Hz (TV):
- 576p (720 x 576p) - EIA/CEA-861B format # 17, 18;
- 720p (1280 x 720p) - EIA/CEA-861B format # 19;
- 1080i (1920 x 1080i) - EIA/CEA-861B format # 20.
60 Hz (TV):
- 480p (720 x 480p) - EIA/CEA-861B format # 2, 3;
- 720p (1280 x 720p) - EIA/CEA-861B format # 4;
- 1080i (1920 x 1080i) - EIA/CEA-861B format #5.
60Hz (PC):
- VGA (640 x 480p);
- SGVA (800 x 600p);
- XGA (1024 x 768p);
- SXGA (1280 X 1024p).
All modes are supported (up to 1080i, SXGA)
PCM (32 kHz, 44.1 kHz, 48 kHz), Dolby Digital or DTS digital audio transmission at a sample
rate of 32-96 kHz Fs
FM, FM-Mono, MW, DAB
Frequency range: 87.5-108 MHz
Antenna input: 75 ohm
Frequency range: 531 kHz - 1602 kHz
Antenna input: 300 ohm
Band: III (174-240 MHz) + L (1452-1492 MHz)
Antenna input: 50 ohm
DLS (Dynamic Label Service) radio text support via on screen display
HDMI: Compatible with DVI 1.0 (HDCP) devices
Power requirements: AC 220-230V, 50/60 Hz
Power consumption: 130 W typical at 1/8 P rated
In standby: 0.48 W
Dimensions: 435 x 380 x 95 mm
Weight (without package): 7 kg
Specifications are subject to change without notice, due to improvements.
ENGLISH 47