Table of Contents
Advertisement
Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the governor speed or overspeed
the engine.
Changing the Engine Oil
Service Interval: After the first 20 hours—Change
the engine oil.
Every 100 hours—Change the engine oil.
1.
Start and run the engine for a few minutes to
warm the engine oil; then shut off the engine.
2.
Raise the machine onto the transport wheels.
3.
Tilt the machine so that the end of the machine
with the engine is closer to the ground, and
support the other end to hold it in this position.
4.
Install the drain hose onto the drain valve
30).
5.
Place the other end of the hose into a suitable
container for oil
(Figure
(Figure
30).
6.
Turn the oil drain valve 1/4 turn counterclockwise
to start draining the oil
7.
When all the oil is drained, turn the oil drain valve
1/4 turn clockwise to close the valve
8.
Remove the drain hose and wipe any oil that
may have spilled.
9.
Fill the crankcase with the specified oil; refer to
Checking the Level of the Engine Oil (page
10.
Dispose of the oil properly. Recycle it according
to local codes.
26
Figure 30
(Figure
30).
(Figure
g029369
30).
14).
Hide quick links:
Advertisement
Table of Contents
