Installing The Transport Wheels; Installing The Hitch Assembly - Toro GreensPro 1260 Greens Roller Operator's Manual

1
Installing the Transport
Wheels
Parts needed for this procedure:
2 Transport wheel
Procedure
1. Remove the lug nuts securing the wheel hubs to
the shipping brackets
the nuts threaded onto the stud of each wheel
hub.
1. Lug nut
2. Carefully remove the shipping brackets from the
crates.
3. Install the transport wheels onto the wheel hubs
with the lug nuts. Hand-tighten the lug nuts.
Note:
The lug nuts will be torqued at the
completion of step 2.
4. Adjust the tire pressure to 103 kPa (15 psi).
(Figure 3). Also, remove
Figure 3
2. Shipping bracket
2
Installing the Hitch
Assembly
Parts needed for this procedure:
1 Lock bracket
4 Bolt (M10 x 30 mm)
4 Lock washer (M10)
6 Washer (M10)
4 Nut (M10)
1 Hitch assembly
1 Bolt (M10 x 100 mm)
1 Locknut (M10)
1 Bolt (M12 x 100 mm)
2 Washer (M12)
1 Locknut (M12)
2 Spacer washer (when applicable)
Procedure
1. Install the lock bracket to the frame of the
machine as shown in
Note:
Torque the nuts to 52 N∙m (38 ft-lb).
g024006
1. Bolt—M10 x 30 mm (4)
2. Lock washer—M10 (4)
3. Washer—M10 (4)
2. Secure the hitch to the hitch pivot bracket with
the appropriate hardware; refer to
8
Figure 4.
Figure 4
4. Nut—M10 (4)
5. Lock bracket
Figure
g036890
5.