Cleaning And Maintenance Of The Device; Storage - Silvercrest SFR 37 A1 Operating Instructions Manual

7. Cleaning and
maintenance of the
device
DANGER! Risk of electric
shock!
The shaving head 3 can be cleaned
under running water. Disconnect the
device from the plug-in power unit ca-
ble 13 prior to doing so.
The plug-in power unit and the corre-
sponding cable 13 must not be held
under running water and must not be
immersed in other liquids.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
Do not place excessive pressure on the
shaving foils 1. They are thin and can
be damaged easily.
Use the cleaning brush 14 for clean-
ing the cutter block 12 only. Under no
circumstances should the shaving
foils 1 be cleaned with it.
NOTE: to ensure a consistently smooth
shave, the device must be cleaned and
maintained regularly.
Cleaning after every dry shave
1. Press both release buttons 4 and take
off the shaving foil frame 2.
2. Tap the shaving foil frame 2 carefully.
3. Clean the cutter blocks 12 with the
cleaning brush 14.
4. Place the shaving foil frame 2 on the
device in such a way that it locks into
place.
10 GB
Cleaning after every wet shave/
occasionally after dry shave
1. If necessary, wipe the device (not the
shaving foils 1) with a slightly mois-
tened cloth.
2. Press the release button 9. The shaving
head 3 opens up.
3. Hold the device facing down and rinse
the cutter blocks 12 and the shaving
foil frame 2 in the shaving head 3 un-
der running water.
4. Allow the parts to dry completely.
• Depending on the intensity of usage,
but at least every 6 months, carefully
spread a small amount of sewing ma-
chine oil on the shaving foils 1, the cut-
ter blocks 12 and the long hair
trimmer 11.

8. Storage

DANGER!
Keep the device out of the reach of
children.
• When the device is not being used,
place the protective lid 10 on the shav-
ing head 3.
• The device and accessories can be
stored in the storage bag 15.