ABB SmartMedia SM2000 Hardware Installation page 7

Videographic recorder

Hide thumbs Also See for SmartMedia SM2000:

4 Downloading and Installing the

Operating System Software – Figs. 4.1 to 4.5

Note. This section is applicable only if the

instrument Operating System requires upgrading to 2002

issue 8.0 or later Application Code and 1002 issue 6.0 or

later System Code – see Fig. 1.1 for details of checking

the Code versions.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 4.1.

3) Push the red switch forwards – see Fig. 4.1.

Information. Refitting is the

reverse of removal.

Unscrew the jacking screw

Remove tamper-proof seal

(if fitted)

Withdraw the instrument

from the case

Fig. 4.1 Setting the Application Launcher Switch

Push the red switch forwards to

enable access to the Application Launcher

Note. Ensure

yellow switch remains in the

forward position.

that

the

Continued...