Access Modular
Controller
4.9.1
RS-485 Two Wire Connection
Figure 4.12: Setting of the jumpers for RS-485 two wire connections
4.9.2
RS-485 Four Wire Connection
Figure 4.13: Settings for RS-485 four wire connection
Notice!
See the notices for setting the RS-232 / RS-485 converter.
Notice!
If a four-wire connection is used the interface must be set up as
a crosslink.
Bosch Sicherheitssysteme GmbH
Installing | en
33
2013-08 | AMC2-4R4 |