Setup; Unfolding The Handle; Checking The Engine-Oil Level - Toro 23511 Operator's Manual

Setup

Unfolding the Handle

1. Raise the handle to the operating position
(Figure 3).
2. Slide the oval locking rings down each side of
the upper handle over the lower handle
3), locking the handle sections together.
Figure 3
Checking the Engine-Oil
Level
The machine comes from the factory with oil in the
engine crankcase; however, you may need to add oil.
Refer to Checking the Engine-Oil Level (page
Add only enough oil to raise the level to the Full mark
on the dipstick.
g023004
(Figure
8
17).