Setup
Unfolding the Handle
1. Raise the handle to the operating position (Figure 4).
1
2. Slide the oval locking rings down each side of the upper
handle over the lower handle (Figure 4), locking the
handle sections together.
Checking the Engine Oil Level
The machine comes from the factory with oil in the engine
crankcase; however, you may need to add oil. Refer to
Checking the Engine Oil Level (page 13). Add only enough
oil to raise the level to the Full mark on the dipstick.
Figure 4
Product Overview
2
1
8
7
1. Operator presence bail
2. Handlebar
3. Throttle control lever
4. Seed gate control lever
g023004
9
3
4
5
Figure 5
5. Fuel tank
6. Seeding rate gauge
7. Depth control lever
8. Recoil-starter rope
6
g023003