Toro Titan HD 136-1682 Installation Instructions Manual page 5

Securing a Trimmer to the
Mount Assemblies
1. Secure the rear end of the trimmer to the rear mount
assembly using the large fist clamp.
2. Loosen the bolts securing the mount plate to the
channel bracket in the front mount assembly
1. Knob
2. Mount plate
3. Pivot the plate so that the small fist clamp lines up with
the trimmer. Tighten the bolts.
4. Loosen the knob and raise or lower the trimmer plate
as necessary (Figure
5. Secure the front end of the trimmer to the front mount
assembly using the fist clamp.
Figure 7
3. Trimmer plate
7). Tighten the knob.
(Figure 7).
g038088
5