Toro Groundsmaster 4000 Operator's Manual page 84

Hide thumbs Also See for Groundsmaster 4000:
Table of Contents

Advertisement

2.
Remove and discard the oil filter. Install a new
oil filter.
3.
Refill the oil pan with designated quantity of
motor oil.
4.
Turn the key in the switch to the O
start the engine, and run it at idle speed for
approximately 2 minutes.
5.
Turn the key in the switch to the O
6.
Thoroughly drain all fuel from the fuel tank, lines,
and the fuel filter/water separator assembly.
7.
Flush the fuel tank with fresh, clean diesel fuel.
8.
Secure all fuel-system fittings.
9.
Thoroughly clean and service the air-cleaner
assembly.
10.
Seal the air-cleaner inlet and the exhaust outlet
with weatherproof tape.
11.
Check the antifreeze protection and add as
needed for expected minimum temperature in
your area.
position,
N
position.
FF
84

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents