Fitting The Support Feet; Installation Site Requirements; Controls - Silvercrest SLB 1.2 D2 Operating Instructions Manual

Fitting the support feet

♦ Slide the support feet
behind
Fig. 1

Installation site requirements

For safe and trouble-free operation of the device, the installation site
must fulfil the following requirements:
■ The device must be placed on a firm, flat and level surface.
■ Do not place the device in a hot, wet or extremely moist environ-
ment or in the vicinity of flammable materials.
■ Place the device so that it is not exposed to direct sunlight, strong
artificial light or heated air.

Controls

LIGHT switch (ON / OFF)
TREBLE switch (ON / OFF)
2
BASS switch (ON / OFF)
3
Rotary switch (on/off and volume control)
4
Headphone socket (3.5 mm jack plug)
5
Loudspeaker
6
Support foot
7
Loudspeaker cable with 3.5 mm jack plug
8
Power supply cable with USB plug
9
│ GB │ IE
■ 20
7
(see fig. 1).
6
6
onto the loudspeaker guide rails from
7
SLB 1.2 D2