Declaration Of Conformity - HP 81110A Quick Start Manual

Declaration of Conformity

Manufacturer:
We declare that the system
conforms to the following standards:
Safety:
EMC:
Supplementary Information
The product herewith complies with the requirements of the
*) Low Voltage Directive (72/23/EEC) and the
*) EMC Directive (89/336/EEC).
During the measurement against EN 55011, the I/O ports were termi-
nated with their normal impedance, the HP-IB connector was terminated
with the cable HP 10833B. When the product is connected to other
devices, the user must ensure that the connecting cables and the other
devices are adequately shielded to prevent radiation.
Boeblingen, June 9th 1998
HP 81110/04A User's Guide Installation & Safety Requirements
Hewlett-Packard GmbH
Boeblingen Verification Solutions
Herrenberger Str. 130
71034 Boeblingen Germany
HP 81100 Family of Pulse/Pattern Generators
HP 81110A 165/330 MHz Pulse/Pattern Generator
HP 81104A 80 MHz Pulse/Pattern Generator
IEC 1010-1:1990 + A1:1992
EN 55011:1991/CISPR 11 Group 1, Class B
EN 61000-4-2:1995 ESD: 4kV cd, 8kV ad, 4kV cp
EN 61000-4-3:1995 Radiated Immunity: 3V/m, 80% AM
ENV 50204:1995 Radiated Immunity: 3V/m, 50% Dty
EN 61000-4-4:1995 Fast Transients/Bursts: 0.5kV, 1kV
EN 61000-4-5:1995 Surges: 1 kVdiff, 2 KV com. mode
EN 61000-4-6:1995 Conducted Immunity
EN 61000-4-8:1993 Power freq. mang. field 3A/m, 50 Hz
IEC 1000-4-11:1994 Voltage Dips and Interruptions
Installation & Safety Requirements
Declaration of Conformity
EN61010-1:1993
Wolfgang Fenske
Regulation Consultant
29