Setting Level Parameter Formats And Values - HP 81110A Quick Start Manual

Setting Level Parameter Formats and
Values
Figure 14
Access the level entry (LEVELS) menu screen by pressing the
|LEVELS|
In this screen you can set the level values individually for both channels.
As with the TIMING screen you can enable or disable the outputs. All
parameters can be entered in different parameter formats, e.g. it is possi-
ble to enter the levels as current values by changing the unit to ampere.
Please select from:
1 Channel OUTPUT Status -
Can also be varied in the |TIMING| screen.
2 Differential Output Status -
Can also be varied in the |TIMING| screen.
NOTE:
3 OUTPUT Mode -
HP 81110/04A Quick Start
LEVELS Screen
softkey.
Differential Outputs are available with HP 81110A with
HP 81112A, 3.8V/330 MHz Output channels installed.
Normal
Introduction

Setting Level Parameter Formats and Values

,
ON OFF
,
ON OFF
,
Complmnt
Introduction
51