Cleaning The Housing; Cleaning The Air Suction Grill - Silvercrest SHTK 2000 A1 Operating Instructions Manual

Cleaning
RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance .
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again .
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it .
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents . They could damage
the surface .

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments .
■ Please dry everything off properly before using the appliance again .

Cleaning the air suction grill

WARNING - RISK OF FIRE!
► Clean the air intake grill 3 at regular intervals with a soft brush .
1) Turn the air intake grill 3 anticlockwise a little way so that it can be removed
from the hair dryer .
2) Clean the openings of the air intake grill 3 with a soft brush .
3) Replace the air intake grille 3 back onto the hair dryer so that the lugs on
the air intake grille 3 engage in the slots on the housing of the hairdryer .
Turn the air intake grill 3 clockwise a little way so that it clicks into place
and sits tightly .
■ 44 │ GB │ MT
SHTK 2000 A1