Table of Contents
Advertisement
Use one-touch navigation service
(Optional)
If you use Careland GPS service and your
phone is connected to the car audio system
via Bluetooth, you can connect to Careland call
center for navigation guide at one touch.
1
Call 400-886-9545 to register your phone
number.
2
Pair your mobile phone with the car
audio system (see the section "Pair the
Bluetooth-enabled devices" for details).
3
Tap
to display main menu.
4
Tap
(Dual-Tone-Multi-Frequency).
» The call center is connected. If
the connection is failed, follow the
onscreen display to check connection.
5
Tell the receptionist where you want to go.
» Navigation routine data will be
transferred to your navigation system
and your car audio will switch to
navigation mode automatically.
Upgrade the map
1
Exit navigation system.
2
Open the card cover.
3
Press on the map card until you hear a
click sound.
4
Pull out the map card and bring it to the
authorized service center for upgrade.
5
Insert the upgraded map card back into
the card slot.
6
Turn on the car audio.
» The map upgrades in a few minutes.
20
EN
7 Play with
Bluetooth
device
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetooth-
enabled device.
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone
near the mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2
Place the microphone at a proper location.
For example,
‡
Stick it onto the dashboard.
‡
Or, clip it on the sun-shield.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the unit,
you need to pair the device to the unit. Pairing
needs only to be done once.
You can pair up to eight devices.
Advertisement
Table of Contents
