Panasonic AFPX-COM5 User Manual page 15

[When Communication cassette AFPX-COM5 is in the client mode]
Dialog box of communication setting: Setting of AFPX-COM5
[When Communication cassette AFPX-COM5 is in the server mode]
Dialog box of communication setting: Setting of AFPX-COM5
Note:
Initializing Ethernet takes approx. 5 seconds on the AFPX-COM5 after turning on the power supply. Until
it finishes, data cannot be sent or received. For Ethernet communication, programming is necessary to
start communication after a lapse of 5 seconds after the power activation.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Item
Communication mode
Action mode
Baud rate (COM1)
Destination IP No.
Destination port No.
Source port No.
Time out
Retry time
Note) Specify the same baud rate as the communication
environment setting of the COM1 port of the FP-X.
Item
Communication mode
Action mode
Baud rate (COM1)
Source port No.
Time out
Note) Specify the same baud rate as the communication
environment setting of the COM1 port of the FP-X.
Setting value
General communication
Client mode
Note)
115200 bps/9600 bps
Destination IP address
1025 to 32767
0, 1025 to 32767
0 to 1800 s
0 to 1800 s
Setting value
General communication
Server mode
Note)
115200 bps/9600 bps
1025 to 32767
0 to 1800 s
15