Reject Call; Silent Mode; Coverage Warning - Toshiba IP4100 Product Bulletin

Reject Call

1. A call must be ringing the IP4100-DECT.
2. Press the Reject soft key.
3. The IP4100-DECT will stop ringing.
Note If Call Forward Busy is set calls will be diverted to the defined destination.

Silent Mode

1. A call must be ringing the IP4100-DECT.
2. When the IP4100-DECT rings, press the Silent soft key.
3. The IP4100-DECT will stop ringing, but the display will continue to alert.
4. Press Talk to answer.
Headset
Headset – Outgoing Call
1. Insert a headset that has a 2.5mm connector into headset jack.
2. Dial digits, and press Talk to establish a call.
3. Audio in each direction will be through headset ear pieces and microphone.
4. Press ' + ' to increase volume to headset.
5. Press ' -' to decrease volume to headset.
6. Remove headset from jack. Audio will be through earpiece and IP4100-DECT microphone.
7. If headset is reinserted audio is through headset again.
8. End call.
Headset – Incoming Call
1. Headset is inserted in jack.
2. IP4100-DECT receives a call and rings/vibrates.
3. Press Talk to answer.
4. Audio is through headset.
5. End call.

Coverage Warning

1. Navigate to Menu > Audio settings > Coverage warning.
2. Select On, and press Exit.
3. When a call is established and one moves to the edge of the IP4100 Base's range a quick 3-beep tone
when at the edge will be heard.
Introducing the New IP4100 DECT Telephone!
Quick Reference Guide
17 of 19