Central Directory; Speaker Mode - Toshiba IP4100 Product Bulletin

Contacts Call
1. Press Contacts soft key.
2. Navigate to highlight a contact.
3. Press Call.
4. Call will be established.
5. End call.

Central Directory

1. Press Menu.
2. Navigate to Central Directory.
3. Navigate to highlight a contact.
4. Press Call.
5. Call will be established.
6. End call.

Speaker Mode

Speaker Button – Outgoing Call
1. Dial a number and press the Speaker key.
2. Press Speaker to hear caller through earpiece.
3. Press Speaker again to put call back through speaker.
4. End call.
Speaker Button – Incoming Call
1. IP4100-DECT is called and rings/vibrates.
2. Press Speaker to answer.
3. Audio is heard through speaker.
4. End call.
Mute
1. A call must be established prior to performing the steps below.
2. Press the Mute button (left side of IP4100-DECT).
3. No audio will be streamed from IP4100-DECT resulting in no audio on far end.
Note Pressing Mute again will re-establish 2 way audio.
Introducing the New IP4100 DECT Telephone!
Quick Reference Guide
15 of 19