Page 6
ENGLISH Introduction With your new Satinelle ICE you can remove unwanted hairs quickly, easily and effectively.The combination of the new ceramic epilating system with the contour-following skin cooler and the massaging system constitutes a revolution in epilation.Thanks to the natural numbing effect of ice and massaging, the new Satinelle ICE makes epilation more comfortable and less painful than ever.The result is a silky-smooth skin and a hair growth reduction of up to 50%, assuming you use the...
Page 7
Check if the voltage indicated on the adapter corresponds to the local mains voltage before you connect the appliance. Only use the appliance in combination with the adapter supplied. Do not use the appliance if the adapter or the appliance itself is damaged.
Page 8
ENGLISH Using the appliance General information about epilation Epilation is easier just after taking a bath or shower. Make sure your skin is completely dry when you start epilating. When you use the appliance for the first time, we advise you to try it out on an area with only light hair growth to get accustomed to the epilation process.
Page 9
Switch the appliance on by selecting the desired speed (fig. 4). Select speed I for areas with little hair growth and for areas where bones are located directly beneath the skin, such as knees and ankles. Select speed II for larger areas with stronger hair growth. Stretch your skin with your free hand to make the hairs stand upright.
Page 10
ENGLISH To epilate the bikini line, stretch the skin with your free hand and place the appliance perpendicularly onto your skin, without exerting any pressure (fig. 10). Move the appliance slowly across the skin against the direction of hair growth. Use the tab on the bottom end of the appliance to remove the appliance from the skin cooler for underarms and bikini line (HP6493 only) (fig.
Page 11
Place the shaving head on the appliance and press it onto the appliance until it snaps home ('click') (fig. 13). Switch the appliance on by selecting speed II. Place the shaving head onto your skin and move the appliance slowly and smoothly against the direction of hair growth, while pressing it lightly (fig.
Page 12
ENGLISH Place the epilating head on the appliance and press it onto the appliance until it snaps home ('click') (fig. 18). The epilating head can only be fitted onto the appliance in one way. Cleaning the shaving head (HP6493 and HP6492 only) Clean the shaving head after every use.
Page 13
(fig. 24). Guarantee & service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet).
ENGLISH Troubleshooting Problem Reduced epilating performance. The appliance does not work. Cause The epilator is being moved in the wrong direction. The epilating head is placed on the skin at the wrong angle. The epilating head does not touch the skin. The skin was moistened with water, or a cream or other skincare product...
Page 15
Problem Skin irritation occurs. The skin cooler is not cold enough. Cause The epilating head has not been attached correctly. You used the epilator for the first time or after a long period of disuse. The skin cooler was not frozen long enough.
Page 16
ENGLISH Problem The pivoting cooling head of the leg skin cooler doesn't move. The epilating head cannot be removed. The shaving head (HP6492 and HP6493 only) cannot be removed. Reduced shaving performance (HP6492 and HP6493 only). Stronger skin irritation than usual after shaving (HP6492 and HP6493 only).