Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 286

Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 9-35
1
Open the latch handle until it clicks.
Holding the door with both hands, pull the door away from the chassis (see Callout 2 in
d.
Press the locking button on the inside surface of the door behind the opened latch to flatten the latch
e.
handle to the front side of the door (see
Open the box for the front door. You can find this box in the box that contains the front door and air
f.
frame kit. Align the four side cushions to the sides of the center panel of the box (see Callouts 1 and
2 in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
9-64
Removing the Front Door from the Chassis
Figure 9-36).
2
Pull the door off the chassis.
Figure 9-34).
Chapter 9 Replacement Procedures
Figure 9-35).
OL-23069-06