Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 382

Repacking the System Components
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
For the upper cable management assembly on the left, loosen and remove five M4x10 screws, and
c.
then lift off the assembly as shown in
Repeat Step 3c for the upper cable management assembly on the right side.
d.
Figure E-15
1
Rack-mount bracket.
2 Upper cable management assembly.
For the lower cable management assembly on the left, loosen and remove four M4x10 screws, and
e.
then lift off the assembly as shown in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-26
Appendix E
Figure
Removing an Upper-Cable-Management Assembly
Figure
Repacking the Cisco Nexus 7000 Series Switch for Shipment
E-15.
3
Loosen and remove five M4x10 screws.
4 Lift the upper cable management assembly off
the rack-mount bracket hooks.
E-16.
OL-23069-06