Philips SBCSC490/00 Instructions For Use Manual page 10

XP SBC SC 490 14-02-2003 16:43 Pagina 10
10 ENGLISH
DC12V DC12V
OUTPUT OUTPUT
TV TV
DC12V DC12V
OUTPUT OUTPUT
TV TV
Parent Unit (C)
The Parent Unit comes with a high performance rechargeable battery pack.
The battery pack must be inserted and charged before the Parent Unit can
be used outside the docking base. When the battery pack is fully charged,
the Parent Unit can be taken out of the docking base and used cordlessly.
Connecting the docking base to the TV
If the camera is connected to the Baby Unit and the docking base to the TV,
you can watch and listen to your baby at any desired moment. For this
select External Input on your TV. If your TV is equipped with 'Picture In
Picture' (PIP) or Full Dual Screen, you can constantly view your baby while
watching TV.
SCART connection
1 Plug the Audio/Video connection cable supplied into both the
SCART/RCA adapter supplied and the OUTPUT TV output (23) of the
docking base.
2 Connect the adapter to the SCART connector of the TV.
RCA connection
1 Connect the single end of the Audio/Video RCA connection cable
supplied to the OUTPUT TV output (23) of the docking base.
2 Connect the audio/video plugs at the other end of the cable to the
appropriate audio/video inputs on your TV. Make sure to insert the yellow
plug into the Video input and the white and red audio plugs into the
L(eft) and R(ight) Audio inputs.
Charging the battery pack/connecting to the mains
1 Remove the battery compartment cover (19) using a screwdriver.
2 Insert the battery pack:
• Plug the connector of the cable into the connector on the right side of
the battery compartment.
• Place the side with the connection cable in the top of the battery
compartment.