Table of Contents
Advertisement
XP SBC SC 490 14-02-2003 16:43 Pagina 9
UP
UP
UP
UP
INPUT
DC12V
CAMERA
Battery back-up
As soon as the batteries are inserted battery back-up will be activated. In
case of mains failure during mains operated use the unit will automatically
switch to battery operated use. As soon as the mains supply is back on the
unit switches to mains operated use again.
Disposal of batteries
Dispose of used batteries in an environmentally friendly manner.
Do not mix old and new batteries, or different types of batteries.
Remove Baby Unit batteries if the Baby Cam is not to be used for
long periods.
Camera Unit (B)
The camera can be mounted to the wall or placed on e.g. a cupboard.
Never place the Camera Unit inside the baby 's bed or playpen.
Once connected to the Baby Unit it allows you to watch your baby, even in
the dark thanks to the built in 'night vision' feature.
Mounting the camera
1 Remove the mounting plate from the camera foot (12).Turn the mounting
plate counter clockwise.
2 Fix the mounting plate to the wall using the screws supplied.
Make sure the screw holes are placed in a vertical line.
3 Place the camera foot (12) back on the mounting plate and tighten by
turning it clockwise. Approximately 1/16 turn. Observe stripes on camera
foot.
4 Place the camera (11) on the foot (12).
5 Connect the camera (11) to the Baby Unit's INPUT CAMERA input (6).
Insert the plug with the flat side up.
6 Point the camera towards the baby.
ENGLISH
9
Advertisement
Table of Contents
