XP SBC SC 490 14-02-2003 16:43 Pagina 18
18
ENGLISH
Replacing the battery in the Parent Unit
1 Remove the battery compartment cover (19) using a screwdriver.
2 Remove the old battery pack.
3 Insert the battery pack:
•
Plug the connector of the cable into the connector on the right side
of the battery compartment.
•
Place the side with the connection cable in the top of the battery
compartment.
4 Put the battery compartment cover back in place and tighten the screws.
> The Parent Unit is now ready for use again.