System Set-Up - Fujitsu MB904 Series Application Note

Change odd page title here
Chapter 2 Hardware Installation

2.2 System Set-up

The emulator system hardware is installed as shown on the following pictures. Please take
care that a target system is connected via a probe cable to the emulator, otherwise
debugging of any software is not possible.
Figure2.2.1 MB2147-05 System Set-up
Figure2.2.2 MB2147-05 System Set-up
© Fujitsu Microelectronics Europe GmbH - 9 - MCU-AN-390077-E-V11