Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual page 15

Part Names and Functions
1.2 A Series Camera
About the DIP Switches
− Gain adjustment
DIP switch 5: ON = 0 to +10dB range gain adjustment volume.
OFF = 0dB
− Potentiometer: When DIP−SW5 is ON, turning this potentiometer to the right
increases the brightness of the image captured by the camera.
− Camera mode switch
DIP switch 6: ON = frame mode
OFF = field mode
− Other
DIP switches 1 to 4, 7, 8: Normally OFF
− Settings when shipped
DIP switch 5 = ON, VOL +10dB. All others are OFF.
Using the Camera Correctly
− When you connect more than one camera to an A200 controller, be sure the cameras
are of the same type.
− When you connect only one camera to an A200 controller, plug it into the Camera
A jack.
− Do not use products other than those specified by us for camera cables or camera
extension cables.
− Do not connect multiple camera cables or camera extension cables to one another
to make an extension.
− Do not touch the camera's CCD elements or lens surface. Also, be sure to cap the
camera when storing it in order to prevent smudges on the CCD elements or lens
surface.
− Change the DIP switch positions in accordance with the camera mode.
− Be very certain not to change the DIP switch settings of other DIP switches.
1 − 6
A200/A100 Hardware