Cs−Mount Camera - Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

A200/A100 Hardware
1.2.2 CS−Mount Camera
3
CS−Mount Camera: Part Names and Functions
1. Camera
The camera's main unit.
2. Lens mount
A CS−mount.
3. Lens
Use the C/CS−mount lens together with an adapter ring as necessary. Select a lens
from the Field of Vision and Lens Selection Table on page 2 − 9.
4. Cable connector
The camera is connected to the controller via this connector. If necessary, also use
a camera extension cable with a part number specified by us.
5. Metal fitting
Hardware used to mount the camera.
Using the Camera Correctly
− When you connect multiple cameras to an A200 controller, be sure the cameras are
of the same type.
− When you connect only one camera to an A200 controller, plug it into the Camera
A jack.
− Do not use products other than those specified by us for camera cables or camera
extension cables.
− Do not connect multiple camera cables or camera extension cables to one another
to make an extension.
− Do not touch the camera's CCD elements or lens surface. Also, be sure to cap the
camera when storing it in order to prevent smudges on the CCD elements or lens
surface.
1
2
5
Part Names and Functions
1.2 A Series Camera
4
1 − 7