Installation and Wiring
A200/A100 Hardware
2.3
Mounting the Controller
2.3
Mounting the Controller
You can mount the controller either by using screws or by hooking it on a DIN rail.
Mounting the Controller on a DIN Rail
The controller can be mounted on or removed from a 35mm wide DIN rail (DIN
EN50022) by a single easy motion.
Mounting
1. Catch the controller on to the hook rail at the top of the DIN rail.
2. Press the controller into position.
Removing
1. Push a straight screwdriver into the mounting lever.
2. Press the mounting lever downward.
3. Pick up the controller to remove it.
Rail
Mounting the Controller Using Screws
Refer to the dimension diagrams on page 9−3, and secure the controller using M3
screws.
2 − 6