IP-PTs with a multiline display (e.g., KX-NT300 series [except KX-NT321])
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
To enter the IP address of the IP-EXT card (PBX IP Address)
Select "PBX".
ENTER
To enter the IP address of the Secondary PBX (optional for KX-NT300 with software
version 2.00 or later only)
Select "Secondary PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
STORE
Press "STORE".
ENTER
Select "Enable" for
DHCP setting.
KX-NT300 with software version 2.00 or later only
ENTER
Select "PBX IP Address".
PBX IP Address
ENTER
The IP-PT will reboot
and establish connection
to the network.
4.2.1 Assigning the IP Addressing Information
SETUP
Press "SETUP"
when it is displayed.
Return to the
Menu screen.
ENTER
ENTER
PBX IP Address
Information about IP Proprietary Telephones
Select "Primary PBX".
ENTER
37