Panasonic KX-TDA30 Manual page 43

KX-NT265
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
VOL
Press VOLUME to
select "Network".
IP Address*
To set the subnet mask address
VOL
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
VOL
Press VOLUME to
select "Default GW".
To enter the IP address of the IP-EXT card (PBX IP Address)
HOLD
Press HOLD
twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
PROG.
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
VOL
Press VOLUME Press SP-PHONE
to select "PBX". twice.
The IP-PT will reboot
and establish connection
to the network.
4.2.1 Assigning the IP Addressing Information
VOL
Press SP-PHONE
twice.
2
3
PBX IP
Address
Press
SP-PHONE.
Information about IP Proprietary Telephones
Press SP-PHONE.
Press SP-PHONE.
HOLD
Press HOLD
to return to the
Menu screen.
43