Panasonic KX-TDA30 Manual page 38

4.2.1 Assigning the IP Addressing Information
KX-NT265
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
VOL
Press VOLUME to
select "Network".
To enter the IP address of the IP-EXT card (PBX IP Address)
VOL
Press VOLUME
to select "PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
38 Information about IP Proprietary Telephones
PROG.
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Press VOLUME to
select "DHCP (Enable)".
PBX IP
Address
Press SP-PHONE
twice.
The IP-PT will reboot
and establish connection
to the network.
VOL
HOLD
Press HOLD to return
to the Menu screen.
Press SP-PHONE. Press HOLD to return
to the Menu screen.
HOLD