Mains Cable/Mains Cable Duct - Silvercrest SGR 150 C2 Operating Instructions And Safety Instructions

Electric food grater SGR 150 C2
Proceed as follows:
First, remove the pusher (12) from the feed
chute (11). Then hold the feed chute (11)
with one hand.
1. Use your thumb and index finger of
your other hand to grip the edge of the
inserted cylinder (4, 5, 6, 7, 10) and feed
chute (11) and press them together as
shown in the illustration.
2. You can detach the cylinder (4, 5, 6, 7,
10) easily in this manner and then remove
it from the feed chute (11).
Be careful when removing the cylinders (4, 5, 6, 7, 10). The blades are very
sharp! There is a risk of injury.
Please note that you cannot insert or remove the cylinder (4, 5, 6, 7, 10) while the feed chute (11)
is attached to the food grater (1).

7.2. Mains cable/mains cable duct

Now, pull the integrated
mains cable as required from
the mains cable duct and
insert the mains plug into a
socket that is always easily
accessible. You can store the
mains cable again in the
mains cable duct after use.
The electric food grater (1) is now ready to use.
Be careful when using and cleaning the cylinders (4, 5, 6, 7, 10). The blades
are very sharp! There is a risk of injury.
12 - English