Led Description - Fujitsu F2MC-8FX Series Application Note

2.5 LED Description

First, when USB cable is plugged to PC, check whether the Power LED turns green or not.
Refer to Figure 2-7.
Second, plug IDC10 cable to the EV-board (target MCU board), then turn on EV-board. After
that, check whether the Power LED on the BGMA turns orange or not. Refer to Figure 2-8.
MB2146-460-E Setup Guide V1.2
Chapter 2 BGMA Manual
Figure 2-7: BGMA Power LED (1)
5V Power
through
IDC
Cable
Figure 2-8: BGMA Power LED (2)
MCU-AN-500083-E-12 – Page 12
Orange