Feature; Hardware Setup - Fujitsu F2MC-8FX Series Application Note

1.4 Feature

The MB95350L Series EV-Board is the best for a performance and functional evaluation,
and operation check before using MB95350L Series MCU in a user's system.
The features of the BGM debugger for MB95350L Series MCU are shown as below.
Microcomputer operation voltage ranging from +1.8V to +3.3V.
Compact development environment, a light and small BGM Adapter.
Since a monitor program is executed in a separate memory space, it does not consume
any user memory space.
Continuous execution, step execution and break correspondence.
It connects with a host computer by the USB interface.

1.5 Hardware Setup

In the hardware setup procedure, you should configure and connect the hardware products.
This section introduces the configuring and connecting procedure for each product. Check
the contents and complete the hardware setup.
Configuration of each product
- Configuring EV-Board
Connection of each product
- Connecting BGMA and EV-board
- Connecting EV-Board power supply
MB2146-460-E Setup Guide V1.2
Chapter 1 Product Overview
MCU-AN-500083-E-12 – Page 7