Loading The Ribbon - Brother TD-4420TN User Manual

3.2 Loading the Ribbon

1. Open the Roll Compartment Cover by
pressing the tabs located on each side of
the printer.
2. Insert the Ribbon Rewind Spindle into
the Paper Core in the direction shown in
the illustrations.
3. First, insert the right side of the Ribbon
Rewind Spindle (marked "R") into the
Ribbon Supply Hub. Then, insert the left
side of the Ribbon Rewind Spindle into
the hole on the left side of the Ribbon
Rewind Hub.
Note
Alternatively, you can use a 0.5" (12.7 mm)
or 1" (25.4 mm) ribbon roll with notches on
both sides. Insert it into the Ribbon Rewind
Hub directly.
L
L
10
R
R