Hitachi Compute Blade Series Update Manual page 77

Performing Firmware Update by Using LP Maintenance Tool
This section describes the LP firmware update procedure by using a CD/DVD drive
connected to the front USB port.
Note that the remote CD function cannot be used for LP firmware update. Make
sure to connect a CD/DVD drive to the USB port at the front panel of the server
blade.
1. Connect a CD/DVD drive to the USB port at front panel of the server blade and insert
the LP firmware CD into the CD/DVD drive.
2. Turn the server blade on.
3. The LP maintenance tool starts.
Select [1. Update LP firmware] and press [Enter].
<< LP Maintenance Tool (Version X.X) >>
---- LP Firmware Information ----
Bank# Version
0 VV-RR(TT-KK)
1 VV-RR(TT-KK)
---- LP License Information ----
LP License [Advanced]
---- Menu ----
1. Update LP Firmware
2. Change LP F/W Active Bank
3. LP Model Upgrade
4. Show Verup License Key
5. Recover LP Configuration
Q. Quit and Reboot
Select : 1
Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
Select
Active
Alternate
Enter "1"
4-5